Alluris FMT-W40 Pull Tester
Features
- For tensile testing of wire terminals according to IEC, DIN, EN, BS, UL, SAE, MIl and NASA standards
- Compact and rugged bench top instrument with hardened scratch-resistant base plate
- 3 test modes selectable for destructive and non-destructive test, pull and break, pull and hold, pull hold and break *
- Constant pull speed in 7 steps selectable between 10…200 mm/min *
Description
The motorized pull tester is a compact bench top instrument to measure the tensile strength of most common solder-free cable joints with end sleeves, pins, solder pins or similar wire terminal components.
Test samples are inserted into the receptacle adaptor, which has 12 different slot widths (from 0.5mm to 6.0mm), covering all the prevalent wire strengths and terminal types. More adaptors are available.
With the optional software the measurement data can be downloaded via the USB interface to MSExcel. It takes only a few minutes to prepare a complete test report with statistical summary as pdf-file (more details please check software FMT-W_Connect).
Test samples are inserted into the receptacle adaptor, which has 12 different slot widths (from 0.5mm to 6.0mm), covering all the prevalent wire strengths and terminal types. More adaptors are available.
With the optional software the measurement data can be downloaded via the USB interface to MSExcel. It takes only a few minutes to prepare a complete test report with statistical summary as pdf-file (more details please check software FMT-W_Connect).
Technical Specifications
| Order No. | |||
| FMT-W40C5 | FMT-W40K1 | ||
| Capacity F(nom)* | N | 500 | 1000 |
| Resolution** | N | 0.5 | 1 |
| Tolerance** | % F(nom) | 0.5 | |
| Temperature coefficient | %/ K | 0.02 | |
| Reproducibility*** | %F | 0 | |
| Repeatability* | %F | 0.25 | |
| Hysteresis*** | %F | 0 | |
| Max. operating force* | % F(nom) | 120 (autoreverse if exceeded) | |
| Measurement error** | % F(nom) | 1.0 | |
| Breaking force* | % F(nom) | 150 | |
| Nominal deflection* | mm | 0.15 | 0.25 |
| Display | Type | LCD, 5 digits, 14mm high | |
| Measuring principle | Force sensor with full-bridge strain gauge and high-speed μ-processor | ||
| Measuring rate | Hz (Peak) | ~ 1.000 | |
| Memory | Statistics memory with display of the mean, maximum, minimum and standard deviation for 1000 measurements | ||
| Cable diameter | mm (slot width) | 0.5 | 0.8 | 1.0 | 1.3 | 1.5 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 5.0 | 6.0 | |
| mm (clamping device) | 0.1 – 6.0 | ||
| Cross section | Range IEC 60352-2 | 0.05 - 4mm2 (AWG 10 - 30) | 0.05 - 6mm2 (AWG 8 - 30) |
| Range SAE AS7928 II | AWG 14 - 30 | AWG 10 - 30 | |
| Min. cable length | mm | 70 | |
| Pull speed | mm/min | 10 | 25 | 37.5 | 50 | 100 | 150 | 200 | |
| Speed tolerance | % | +/- 2.0 | |
| Power supply | Type | 24 VDC | 3A | |
| Interface | USB 2.0 | Optional software FMT-W_Connect | |
| Adm. temperature | Operation (°C) | 0 - 30 | |
| Stocking (°C) | -5 - 60 | ||
| Weight | kg | 14.5 | |
| Dimension (LxWxH) | mm | 320 x 160 x 115 | |
| Material | Anodised aluminum, surface hardened steel, stainless steel V2A, polystyrene | ||
*) according to VDI / VDE / DKD 2638 at 0.2 ... 1 x F (nom)
**) according to DIN 1319-1
***) due to design and application, no independent error contribution
Scope of Supply
Pull tester (desktop unit) complete with test adapter, motor-driven traction, USB interface, CD-ROM with software (without license), data cable and universal power supply. Operating instructions (DE, EN, FR, SP, IT) with CE conformity confirmation, DAkkS calibration certificate, software license, interchangeable adapter and carrying case must be ordered separately.
Downloads
Product Video
US 975 
MY 585 
CN 237 
AP 221 
KR 81 
AU 76 
GB 49 
CA 49 
